ENERGY STAR® qualified with a 96% thermal efficiency
Higher recovery rate so you don’t need to wait as long for the water to heat back up
LCD screen with an easy-to-navigate menu providing precise temperature control, operating information, diagnostics and performance history
Flexible venting options, so it can be vented as a power direct vent or power vent heater
Hot and cold side taps allow for combination systems for water heating plus space heating, radiant floor heating or other applications requiring a recirculating hot water loop
Two anode rods that provide superior protection against corrosion
Commercial-grade glass lining protects all water side tank surfaces plus inside of internal heat exchanger
Available in 50USG and 75USG capacities
|Nominal Capacity: |
|Rated Storage Volume: |
|ENERGY STAR® Certified:||Yes|
|Limited Warranty Tank:||6 years|
|Limited Warranty Parts:||6 years|
|BTU Input:||50000 BTUs|
|Water Connection Location:||Top|
|Water Connection Size:||3/4″|
|T&P Relief Valve:|
|Height w/Draft Hood:||68 1/8″|
|Vent Diameter:||2,3 or 4″|
There are a lot of determining factors that can change the price of a water heater install. But a “ballpark price” you can range anywhere from $1,800 $2,400 for a natural draft (chimney) water heater and $2,200-$2,600 for a power vented (fan assisted) water heater. If you are looking for a tankless water heater these can range from $4,000+. These are great starting numbers but you have to remember every install is different and depending on code upgrades, electrical and added accessories these number can fluctuate lower or higher. That’s why it is always best to call in and ask for a free in house estimate so we can measure everything on site and give you an honest quote in the comfort of your own home. All of our comfort advisors have journeyperson status with years of install experience. We aren’t sales people…. We are a company with your best interests in mind.
All companies have different costs of over head. At J&A we have a 6,000 sq/ft building we call home. We pride ourselves proper training for our employees, company vehicles and a career at J&A not just a job. Our installers take pride in their work. We guarantee there are companies out there that will be able to give you a “cheaper quote” but guess what… we aren’t a cheap company, and we don’t take short cuts. We have been around since 1978 and have employee that have been working here longer than most of those “cheaper quote” companies can keep there doors open for. We don’t believe in taillight warranty. So if you are looking for a company that can provide you with 12 years parts and 12 years labour then look no further.
After we have set up a time that works best for you we will call you the day prior to confirm the appointment (that’s if we aren’t already doing a same day install)
The morning of the install we will have one of our technicians give you a call with his/her estimated time of arrival (usually between 8-9am).
He/She will go over the details of the install with you and the Comfort Advisor you had discussed the protect with.
After a confirmed game plan has been discussed our installer with put down drop sheets throughout the home to best project your home from any unforeseen mess in the process of the install.
The install can range anywhere from 4-8 hours depending on the difficulty. (Remember this is the advantage of having us come in prior to take measurements, discuss the install, location of venting, etc)
Once the installed is completed we ask the homeowner to be present at home in order to go over and explain the new system and its sequence of operation.
Our installers carry I-pads so they are able to register your equipment for warranty as soon as they finish collecting payment.
Within the next few days you can expect a follow up call from the office or from your Comfort Advisor to see how you are liking your new system.